Kingston 32GB 2X16GB KF436C18BBAK2/32 DDR4 3600 KIT Memory

Details

SPECIFICATIONS
KF436C18BBAK2/32
32GB (16GB 2G x 64-Bit x 2 pcs.)
DDR4 3600 CL18 288 Pi DIMM Kit
Continued >>
FEATURES
FURY KF436C18BBAK2/32 is a kit of two 2G x 64-bit (16GB)
DDR4-3600 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 2G x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel®
XMP) 2.0. Total kit capacity is 32GB. Each module has been tested
to run at DDR4-3600 at a low latency timing of 18-22-22 at 1.35V.
The SPDs are programmed to JEDEC standard latency DDR4-2400
timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact
fingers. The JEDEC standard electrical and mechanical
specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V - 0
0o
 C to +70o
 C
-40o
 C to +85o
 C
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR4-2400 CL17-17-17 @ 1.2V
• XMP Profile #1: DDR4-3600 CL18-22-22 @ 1.35V
• XMP Profile #2: DDR4-3000 CL16-18-18 @ 1.35V
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.62” (41.2mm), w/heatsink