Gigabyte GA-IMB4100TN

Details

Specification

• CPU
  1. Built in with an Intel^® Quad-Core Celeron^® N4100 SoC (2.4 GHz)
     * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
  2. 2 MB Cache
• Memory
  1. 2 x DDR4 SO-DIMM socket supporting up to 16 GB of system memory
  2. Dual channel memory architecture
  3. Support for DDR4 2133MHz memory module

  (Please refer "Memory Support List" for more information.)
• Onboard Graphics
  Integrated in the SoC:

  1. 1 x D-Sub port, supporting a maximum resolution of 1920 x 1200@60 Hz
  2. 1 x LVDS connector supporting a maximum resolution of 1920 x 1200@60Hz
  3. 1 x HDMI 2.0 port, supporting a maximum resolution of 3840 x 2160@60 Hz

  Maximum shared memory of 512 MB
• Audio
  1. Realtek^® ALC887codec
  2. High Definition Audio
  3. 2/4/5-channel
• LAN
  1. 2 x Realtek^® GbE LAN chips (10/100/1000 Mbit)
• Expansion Slots
  1. 1 x PCI Express x1 slot
     (The PCI Express x1 slot conforms to PCI Express 2.0 standard.)
  2. 1 x M.2 Socket 1 connector for an Intel^® wireless module (CNVI)
  3. 1 x full size Mini PCIe connector (MINI_PCIE)
     (The Mini PCIe connector conforms to PCI Express 2.0 standard.)
• Storage Interface
  Integrated in the SoC:

  1. 2 x SATA 6Gb/s connectors
  2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/80 SATA and PCIe x1 SSD support)
     * The M.2 connector operates at up to x1 mode.
• USB
  Integrated in the SoC:

  1. 4 x USB 3.1 Gen 1 ports on the back panel
  2. 4 x USB 2.0/1.1 ports available through the internal USB headers
• Internal I/O Connectors
  1. 1 x 4-pin ATX 12V power connector
  2. 1 x CPU fan header
  3. 1 x system fan header
  4. 2 x SATA 6Gb/s connectors
  5. 1 x M.2 Socket 3 connector
  6. 1 x SATA power connector
  7. 1 x front panel header
  8. 1 x front panel audio header
  9. 1 x battery cable header
  10. 2 x USB 2.0/1.1 headers
  11. 6 x serial port headers
  12. 6 x serial port power select jumpers
  13. 1 x D-Sub header
  14. 1 x LVDS header
  15. 1 x LVDS drive voltage jumper (LCD_VCC)
  16. 1 x flat panel display header (FPD)
  17. 1 x flat panel display power select jumper (FPD_PWR)
  18. 1 x flat panel display switch header (MON_SW)
  19. 1 x backlight switch header (BL_SW)
  20. 1 x digital microphone header (DMIC_CON)
  21. 1 x speaker header (SPKR)
  22. 1 x buzzer header (SPEAKER)
  23. 1 x chassis intrusion jumper
  24. 1 x LPT/GPIO header (LPT_GPIO)
  25. 1 x LPT configuration jumper (LPT_SEL)
  26. 1 x GPIO power selection jumper (GPIO_PWRSEL)
  27. 1 x GPIO status configuration jumper (GPIO_SET)
  28. 1 x BIOS Select jumper (BIOS_SET)
  29. 1 x Clear CMOS jumper
  30. 1 x I2C
  31. 1 x SMBUS
• Back Panel Connectors
  1. 1 x DC-In power connector
  2. 1 x HDMI2.0 port
  3. 1 x D-Sub port
  4. 4 x USB 3.1 Gen 1 ports
  5. 2 x RJ-45 ports
  6. 2 x audio jacks (Line In, Mic In)
• I/O Controller
  1. iTE^® I/O Controller Chip
• H/W Monitoring
  1. Voltage detection
  2. Temperature detection
  3. Fan speed detection
• BIOS
  1. 1 x 64 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
• Unique Features
  1. Support for Xpress Install
  2. Support for @BIOS
  3. Support for APP Center
     * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications
• Bundled Software
  1. Norton^® Internet Security (OEM version)
• Operating System
  1. Support for Windows 10 64-bit
• Form Factor
  1. Thin Mini-ITX Form Factor; 17.0cm x 17.0cm